Mailbox ... 33 Voice control ... 34 Out of memory ... 34 Control from the handset ... 35 Remote code ... 36 Remote activation of the answering machine ... 36 Remote control... 37 Other Troubleshooting... 38 Guarantee ... 40 www.doro.com...
TV sets, computer screens, telecom equipment, fans etc. This will minimise the risk of interference. Do not place the base unit in areas where it will be exposed to direct sunlight or other major heat sources. Only use with the supplied power adapter/s. *Connect the correct adapter according www.doro.com Installation - Mains adapter - Line cord T socket on the base unit.
However, we recommend turning the handset off if it is not to be used for a prolonged period of time, e.g. during a holiday. If the batteries run low, the handset will turn off. Installation button for a few seconds to turn the handset off or on. on the www.doro.com www.doro.com...
This telephone supports the use of the mute button on the headset cable. Please note Immediately reduce the ringer and earpiece volume on the handset when connecting an optional headset. The performance of a non-original DORO headset cannot be guaranteed. www.doro.com...
English The display DORO DECT 1 Indicator Function Phone Book Message indication can be erased manually by turning off the handset. Hands free Function Key Lock Menu Indicates that a handset is connected (during a call). External call Intercom Function Battery charge indicator New number(s) in Caller ID log.
You MUST wait until the call is established if you wish to change the earpiece volume. The earpiece volume cannot be adjusted during the dial tone period or when transfering an ongoing call between handsets. www.doro.com Operation to the required telephone number...
Access to additional network services can be gained by using the recall button and # keys. Contact your network operator for more information. Press the recall button to a PBX (TBR only). Operation again. followed by the extension number to when connected . Press again to re- on the www.doro.com www.doro.com...
It is therefore essential that there are no loud noises in the immediate vicinity of the telephone, as this will disrupt the speaker function. www.doro.com Operation is located on the front of the handset, this allows again.
A message has been left at your network message service. This feature may not work in all countries. in the display in the display in the display the time and date the time and date x to return to www.doro.com www.doro.com...
Page 13
15. Press x to delete or make changes. 6. Press to confi rm or hold to confi rm or hold www.doro.com x to return to standby. repeatedly until DELETE is repeatedly until DELETE is x down to return to standby.
Under this setting you can store or change entries in the phone book. HANDSET Setting the handset ring signal, language, button sound, etc. SETUP Setting the base unit ring signal, PIN code and reset. REGISTER Used to register extra handsets. Menu www.doro.com...
If you need to insert a pause in the telephone number, press and hold If you need to insert a pause in the telephone number, press and hold If you need to insert a pause in the telephone number, press and hold www.doro.com Phone Book Letters/symbols...
Page 16
PHONEBK. Press 3. Scroll to DELETE. Press 4. Scroll the name/number you wish to delete. Press 5. Press again twice to confi rm. again twice to confi rm. 6. Press and hold x to return to standby. Phone Book www.doro.com www.doro.com...
The volume may be adjusted during a call using 1. Press 2. Scroll to HANDSET. Press 3. Scroll to EAR VOL. Press 4. Scroll to the required setting. Press www.doro.com Handset settings English to save. to save. to save. to save. , or in the menu.
1. Press 2. Scroll to HANDSET. Press 3. Scroll to AUTO ANS. Press 4. Scroll to the required setting. Press Handset settings to save. to save. to save. to save. www.doro.com www.doro.com...
Language Display texts can be shown in eleven different languages. 1. Press 2. Scroll to HANDSET. Press 3. Scroll to LANGUAGE. Press 4. Scroll to the required language. Press www.doro.com Handset settings English to save. to save.
SETUP. Press 3. Scroll to DEL HS. Press 4. Enter the current PIN number (0000 when supplied). Press 5. Scroll to the handset number you wish to de-register. 6. Press Settings to save. to save. to save. to save. www.doro.com www.doro.com...
7. Press to save. to save. Turning Handset Priority On/Off 1. Press 2. Scroll to SETUP. Press 3. Scroll to PRIORITY. Press 4. Scroll to the required setting (ON or OFF). 5. Press to save. to save. www.doro.com Settings English...
123456. The telephone can handle two prefi xes of up to 4 digits. PREFIX 1 is the normal setting and PREFIX 2 is used if a second prefi x and pause interval are required. Settings www.doro.com www.doro.com...
1. Press 2. Scroll to SETUP. Press 3. Scroll to DEFAULT. Press 4. Enter the current PIN number (0000 when supplied). 5. Press www.doro.com Settings English...
6. If the registration is successful the handset will return to standby mode in a few seconds (max 90 secs). Registration on the base unit until . Previously registered base numbers will fl ash. starts fl ashing. Registration starts fl ashing. Registration www.doro.com...
Expanded System General information DECT (Digital Enhanced Cordless Telephone) is a digital method of transmission for cordless telephones. You can: Use up to 5 handsets with the same base unit. Make internal calls (intercom) and transfer calls between handsets using the same base unit.
P / 2 ... Answer only (ANN) function selected r ... Recording in progress, please wait t , 2-9 ... Setting the number of rings before the machine H... Maximum volume www.doro.com Function page 30 messages being displayed nine messages recorded...
1. Press and hold 2. Press for the normal outgoing message (OGM) or (ANN). 3. The display will fl ash be heard. until you hear “Please select outgoing message”. (OGM) or (ANN). The selected message will for Answer only www.doro.com www.doro.com...
This allows you to reset the OGM back to the original factory message. 1. Press until you hear “Answer On, your outgoing message is”. 2. While the OGM is playing press C. www.doro.com (OGM) or (ANN). The selected message will ) to stop recording.
If on the other hand the machine answers after two rings new messages have been recorded. until the current setting is announced. www.doro.com www.doro.com...
+/ +/ + - Increase or decrease the volume. Message playback (ICM). Press again to pause during playback (max. 60 seconds), the display will show every 10 seconds. Press www.doro.com ■ within 8 seconds. and a beep is heard again to continue playback.
1. Press and hold 2. Press and hold or lifting the handset of another or lifting the handset of another ■ until the current setting is announced. again to switch between function On or OFF. on the base unit. www.doro.com www.doro.com...
1. Press and hold either . A beep will be heard. 2. Speak in the direction of the base unit to record your memo message. 3. Release either to stop recording. www.doro.com...
3 ... Record new outgoing message (press # stop 4 ... Record Answer only message (press # stop 5 ... Select normal answering function 6 ... Select Answer only 8 ... To hear the outgoing message menu www.doro.com Function stop recording) Function recording)
3. Enter the current remote code (123 when supplied). 4. The number of new messages will be announced, and message playback will begin. Press to stop playback. 5. To switch the answering machine On press 6. Terminate the call. www.doro.com www.doro.com...
If the machine doesn’t respond correctly to the remote control commands, try pressing the telephone buttons for a longer or shorter time. In normal cases, the answering machine should react to tones approximately 0.5 – 1 seconds in length, but longer tones may be necessary in certain telephone networks. www.doro.com...
Check the charge status of the handset batteries. Try connecting another telephone, known to be in working order, to the line socket. If that phone works, then it is likely that the equipment is faulty. Other www.doro.com www.doro.com...
Page 39
If there are still problems with the operation please contact our support departments. If the telephone still does not work, contact your local Doro Support department or the place of purchase. Don’t forget the receipt or copy of the invoice.
9AM - 5PM Monday-Friday excluding Bank Holidays. Alternatively, E-mail on: tech@doro-uk.com You can contact us in writing: Consumer Support Group, Doro UK Ltd., 22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE, (regarding any Spares or Technical query), or Telephoning (Spares only): 01527 584377 Web site: www.doro-uk.com...
(As a matter of precaution, we recommend disconnecting the telephone during a thunderstorm). This guarantee does not affect your statutory rights. AUSTRALIA DORO Australia Pty Ltd PO Box 6760 Baulkham Hills BC NSW 2153 Australia Consumer Support...
DO NOT dial the area code digit or the “0“ prefi x. Answering Machines Please note when set to answer after 2 rings this product may block CID information when used in conjunction with certain distinctive ring signals (FaxAbility). Other www.doro.com www.doro.com...