Audio Signals And Display; Date/Time/Alarm - Doro 670R Manual

Audio signals and display

1. Press Menu.
2. Scroll to Sound or Display. Press OK.
3. Scroll to desired function e.g. Display Contrast. Press OK.
4. Scroll to required setting. Press OK to save.
Sound
Ringtone
The telephone may continue to ring for up to 8 seconds after answering a call when the handset is set to use
one of the polyphonic ring tones (6-20).
Tones
Display
Wallpaper
Handset Name
Screensaver
Display Contrast
Color Scheme
Backlight On/Off
Dimmed backlight Function that shows the display with reduced light before it

Date/Time/Alarm

1. Press Menu. Scroll to Date/Time/Alarm. Press OK.
2. Scroll to required setting. Press OK to save.
Alarm
Calendar
Set Date & Time
English
The handset's ring signal can be adjusted.
Can be heard when pressing buttons, low battery, new SMS,
charging start or out of range.
The background image in the display can be changed.
The text shown on standby can be altered.
The clock replacing dimmed backlight can be turned off/on.
The contrast in the display can be adjusted at several levels.
The colour of the menus can be changed.
Illumination for the buttons can be turned off/on.
turns off. When activated permanently on, the battery times are
reduced 50%.
The activated alarm is indicated with
When the alarm goes off, an audio signal is heard for 30 seconds.
Turn off permanently with Stop, or activate snooze 5 minutes
with any button on the handset. The volume is determined by the
set ring signal level. The alarm will go off every day if it is not
disconnected via the menu.
To store information/reminders.
Setting of date/time is described in the Connection chapter.

on standby.