Table of Contents
Advertisement
Answering machine settings
1. Press Menu.
2. Scroll to TAM. Press OK.
3. Scroll to Answer Settings. Press OK.
4. Scroll to desired function e.g. Recording time. Press OK.
5. Scroll to required setting. Press OK to save.
Answer Mode
Outgoing message Record and play back your outgoing message.
Answer Delay
Message Alert
Recording time
Change Remote PIN To change the remote password PIN code (0000 on delivery).
The Time Saver function answers calls after six ring signals, until the first new message has been registered.
Then the answering machine switches to answering after approximately two signals. This is useful when
using remote control; if you call up the answering machine and there is no reply after four rings that means
there are no messages recorded and you can hang up before you are charged for the call.
Personal message - MEMO
A personal message – a MEMO – is a message recorded directly onto the answering
machine without dialling (min 5 seconds and max 3 mins).
1. Press Menu.
2. Scroll to TAM. Press OK.
3. Scroll to Record Memo. Press OK.
4. Record your message. Speak clearly approx. 30 cm from the handset with the keys
facing towards you.
5. Press Save to terminate recording. The message will be repeated after a few seconds.
6. Memos are played back in the same way as regular incoming messages.
Out of memory
The memory will store a total of 15 minutes of messages (including the outgoing message).
When TAM memory full is shown or the base unit flashes F, no new messages can
be received before existing ones are played back and deleted. In that case, the telephone
answering machine responds with the outgoing message for Answer only.
Note:
Delete old messages regularly to avoid filling up the memory!
English
Select between normal answering function and answer only
(callers cannot leave a message).
Select the number of ring signals before the answering machine
responds to incoming calls (2,4,6,8, Time Saver*).
Is heard at regular intervals when at least one new message is received.
Enter the maximum recording time for messages.
Advertisement
Table of Contents
