Replacing A Rear Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha MAJESTY YP400A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a rear turn signal
light bulb
1. Place the scooter on the center-
1 stand.
2. Remove cowling C for replacing
the left turn signal light bulb or
2
cowling D for replacing the right
turn signal light
3
page 6-7.)
3. Remove the socket (together with
the turn signal light bulb) by turning
4
it counterclockwise.
5
6
7
8
9
1. Turn signal light bulb socket
4. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
5. Insert a new bulb into the socket,
EAU34263 push it in, and then turn it clock-
wise until it stops.
bulb. (See
1. Turn signal light bulb
2. Turn signal light bulb socket
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the cowling removed.
1
Replacing the license plate
light bulb
1
2
1. License plate light lens
2. License plate light cover
3. Screw
6-34
1. Place the scooter on the center-
stand.
2. Remove cowling
page 6-7.)
3. Remove the license plate light cov-
er and license plate light lens by
removing the screws.
1
4. Remove the burnt-out bulb by pull-
ing it out.
EAU47900
B. (See
2
3