Yamaha MAJESTY YP400A Owner's Manual page 57

1
2
3
4
1. Engine oil filler cap
2. Dipstick
3. Maximum level mark
4. Minimum level mark
4. If the engine oil is below the mini-
mum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
5. Insert the dipstick into the oil filler
hole, and then tighten the oil filler
cap.
To change the engine oil (with or
without oil filter element replace-
ment)
1. Start the engine, warm it up for
several minutes, and then turn it
off.
PERIODIC MAINTENANCE AND ADJUSTMENT
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap
and the engine oil drain bolt to
1
drain the oil from the crankcase.
1. Engine oil drain bolt
4. Check the washer for damage and
replace it if necessary.
1
1. Engine oil drain bolt
2. Washer
TIP
Skip steps 5–7 if the oil filter element is
not being replaced.
6-13
2
1
5. Remove the oil filter element cover
by removing the bolts. NOTICE:
When removing the oil filter ele-
ment cover, the compression
spring will fall out. Take care not
to lose the compression
spring.
[ECA12911]
2
3
4
5
6
7
8
9