Replacing A Rear Turn Signal Light Bulb - Yamaha Aerox GDR155 Owner's Manual

1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
Replacing a rear turn signal
light bulb
1. Remove the rear turn signal lens
1
by removing the screw.
1. Screw
2. Remove the burnt-out bulb by
pulling it out.
1. Turn signal light bulb
Periodic maintenance and adjustment
EAUU1121
1
1
9-32
3. Insert a new bulb into the socket
by pushing it in.
NOTICE
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
4. Install the lens by installing the
screw.NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11192]
ECAU0081
9