Operation And Important Riding Points; Starting The Engine - Yamaha MAJESTY YP400A Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15951
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. In this case, the multi-func-
EWA10271
tion display indicates error code 30, but
this is not a malfunction. Turn the key to
"OFF" and then to "ON" to clear the er-
ror code. Failing to do so will prevent
the engine from starting even though
the engine will crank when pushing the
start switch.
EAU48020

Starting the engine

NOTICE
See page 5-4 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up.
See page 3-22 for more information.
1. Turn the key to "ON" and make
G
G
G
G
G
NOTICE
If a warning light, indicator light or
indicator does not go off, see pages
5-1
sure that the engine stop switch is
set to " ".
The following warning lights, indi-
cator light and indicators should
come on for a few seconds, then
go off.
Engine trouble warning light
ABS warning light (for ABS mod-
els)
Immobilizer system indicator light
V-belt replacement indicator
Oil change indicator
EAU36512
ECA10250
2
3
4
5
6
7
8
9
ECA15022