Replacing A Front Turn Signal Light Bulb; Replacing The Tail/Brake Light Bulb Or A Rear Turn Signal Light Bulb - Yamaha MIO AL115S Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a front turn signal
light bulb
NOTICE
_
It is advisable to have a Yamaha
dealer perform this job.
_
1. Place the scooter on the center-
stand.
2. Remove cowling A. (See page
7-6.)
7
1
ZAUU0261
1. Front turn signal light bulb socket
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
4. Remove the burnt out bulb by
pulling it out of the socket.
EAUU0590 5. Insert a new bulb into the socket
by pushing it in until it stops.
6. Install the socket (together with
ECA10670
the bulb) by turning it clockwise.
7. Install the cowling.
7-31
Replacing the tail/brake light
bulb or a rear turn signal light
bulb
Place the vehicle on the centerstand.
Tail/brake light bulb
1. Open the seat. (See page 4-8 for
seat opening and closing proce-
dures.)
ZAUU0154
1. Tail/brake light bulb socket
2. Remove the tail/brake light bulb
socket by turning it counterclock-
wise.
EAUU0301