Front Turn Signal Light; Replacing A Rear Turn Signal Light Bulb - Yamaha Grand filano LTF125-I Owner's Manual

Front turn signal light

If a front turn signal light does not
come on, have a Yamaha dealer check
its electrical circuit or replace the bulb.
Periodic maintenance and adjustment
EAU39881
Replacing a rear turn signal
light bulb
1. Remove the rear panel by remov-
ing the screws.
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the rear panel by installing
the screws.
9-30
EAUV0780
NOTICE
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
1
ECAU0081
9