Front Brake Lever - Yamaha MAJESTY YP400A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
cate a malfunction.
Hazard switch " "
With the key in the "ON" or "
1
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
2
turn signal lights).
The hazard lights are used in case of
3 an emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
4
NOTICE
5
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
6
tery may discharge.
7
8
9

Front brake lever

EAU12733
2
" posi-
3
ECA10061
1. Front brake lever
2. Brake lever position adjusting dial
3. " " mark
4. Distance between brake lever and
handlebar grip
The front brake lever is located at the
right handlebar grip. To apply the front
brake, pull this lever toward the handle-
bar grip.
The front brake lever is equipped with a
position adjusting dial. To adjust the
distance between the front brake lever
and the handlebar grip, turn the adjust-
ing dial while holding the front brake le-
ver pushed away from the handlebar
grip. Make sure that the appropriate
setting on the adjusting dial is aligned
EAU44910 with the "
ver.
1
4
3-11
" mark on the front brake le-