Property
Make sure that Source is set to the
appropriate paper tray.
Use the Manual Feed source when printing
to special material. You need to load one
sheet at a time into the Multipurpose tray. See
page 3.8.
If you install an optional Tray 2 and set the
Source
3
Tray 2 in printer properties (see page B.7),
you can select Tray2.
If the paper source is set to Auto Select, the
machine automatically picks up print material
in the following order: the Multipurpose tray,
Tray 1, and optional Tray 2.
Make sure that Type is set to Printer
Default. If you load a different type of print
material, select the corresponding paper type.
For more information about print materials,
see Chapter 3, Paper Handling.
4
Type
If you use cotton paper, set the paper type to
Thick for the best printing.
To use recycled paper, which weighs from
75g/m
paper, select Color Paper.
This property allows you to print the first page
using a different paper type from the rest of
the document. You can select the paper
source for the first page.
For example, load thick stock for the first
First Page
5
page into the Multipurpose tray, and plain
paper into Tray1. Then, select Tray1 in the
Source option and Multi-Purpose Tray in
the First Page option.
Scaling allows you to automatically or
manually scale your print job on a page.
You can choose from None, Fit to Page, and
Scaling
6
Reduce/Enlarge. For details, see
page 4.16~4.17.
Description
2
2
to 90g/m
(20lb to 24lb), or colored
P
RINTING
4
T
4.7
ASKS