Test Print - Ricoh 3180DNP User Manual

Test Print

To ensure the Type 103 has been installed on the network correctly a test print should be
submitted from a client workstation. Perform the following steps:
Open a document on a client workstation.
1
Select the Type 103 as the printer for sending documents to.
2
Print the document on the device and verify that it prints correctly.
3
Ensure the print driver is installed on every workstation that will be sending jobs to the
4
device.
Repeat the test for all workstations that will be sending jobs to the device.
5
Page 1-10 Administrator Guide