Setup Program; Ms-Dos Version: Setup61/62, Rom Version: Setup Utility ) 2 - Panasonic CF-61 Series Operating Instructions Manual

Setup Program

(Windows 95 Version: WSET61/62, MS-DOS Version: SETUP61/62, ROM Version: Setup Utility)
Windows 95 version
<For except CF-61KXF4BAM/E model>
MS-DOS version
<For except CF-61KXF4BAM/E model>
:\WINDOWS>
ROM version
<For CF-61KXF4BAM/E model only>
Follow the procedure below to specify the operating environment settings (device
port addresses and IRQs, password security, drive protection and reduced power
consumption etc.) for the computer.
Most of the items can be set by either Windows 95, MS-DOS or ROM version.
Select [Start]-[Programs]-[Panasonic]-[Setup61 Windows].
61
Select [Start]-[Programs]-[Panasonic]-[Setup62 Windows].
62
Exit Windows 95 and restart the computer in the MS-DOS mode.
Type the following:
SETUP61
61
MEMO
If the computer cannot be booted from the hard disk, boot it from the "Firstaid FD."
Insert the "Firstaid FD" into the floppy disk drive and power on the computer.
1 Boot
2 Restore HDD to factory default
3 PD tools
62
A:\WINDOWS\COMMAND>
Power on.
Press when the messages "Press F1 for Setup" appear.
(These messages appear only for a few seconds. Setup utility does not
run if you delay pressing
Setup
System Setup
Power Management
Supervisor Setup
Save settings
Restore Settings
Load Default Settings(PnP)
Load Default Settings(NonPnP)
Exit Setup
Specify your operating environment settings (device port addresses and
IRQs, password security, drive protection and power consumption etc.)
and select [Save Settings].
Select [Exit Setup].
Details
grams"-"Setup Program"
62 SETUP62
Type the following:
SETUP61
61
.)
Utility
Details
"On-Line Manual"-"Utility Pro-
62
SETUP62
On-line Help ( Please press
"On-Line Manual"-"Utility
Programs"-"Setup Utility"
Please print the On-Line manual
( P.13).
.)
27