Panasonic CF-61 Series Operating Instructions Manual page 12

Basic Operation
Firstaid FD etc. creation
Firstaid FD creation
* modifications and unforeseen situations. Make sure you have the
* respective software installation disks.
*
Firstaid FD 1
*
* If you have the floppy disk(s) in hand, press any key and advance
the next step. Any data on these disks will, however, destroyed.
*
If the floppy disks are not currently available, turn off the pow
*
until they are.
*
********************************************************************
Press any key to continue...
Ready to create Firstaid FD.
Insert a floppy disk in drive A and press any key.
Please remove the diskette and write protect it.
Press any key to continue...
On-Line manual creation
Have you correctly created the Firstaid FD [Y,N]?
Please insert the Firstaid CD.
Press any key to continue...
Startup screen
12
Set the correct Date, Time and Time Zone, then click [Close]. (Note: These set-
8
tings can be changed later.)
If you want to install your printer driver(s), click [Next]. Follow the prompts on
9
the screen to specify the printer(s). Otherwise, click [Cancel]. (Note: Printer driv-
ers can be added later.)
Close the "Welcome to Windows 95" screen.
10
You can now use Windows 95, but in order to set the Panasonic original environ-
11
ment and create Firstaid FD, select <Go> (Panasonic Setup)
starts. If Windows does not restart, press the RESET button.
Beginning with the next time you turn on the computer, this screen will be displayed
as soon as power is switched on.
To set the user password
ity"-"System Setup"-"User Password"
MEMO
The WLineMic screen will not appear the next time the computer is started if you uncheck
this option. To start the WLineMic program, click [Start]-[Programs]-[Panasonic]-[WLineMic].
The icon displayed when the WLineMic program starts indicates the current status of the
audio-in jack.
How to use the WLineMic program
Audio-In Jack"
Blank 3.5-inch
( P.17)
floppy disk
( P.17)
Firstaid CD ( P.15)
"On-Line Manual"-"Utility Programs"-"Setup Util-
"On-Line Manual"-"Utility Programs"-"Switching the
. Windows re-