Repositioning The Motion Detection Area - Casio Exilim EX-FC400S User Manual

Repositioning the Motion Detection Area (Motion Position)
Use the procedure below to reposition the motion detection area
icon) as required when it (or the preview icon
image.
1.
In the REC mode, press [MENU].
2.
Press [4], use [8] and [2] to select the
" r REC MENU" tab, and then press [6].
3.
Use [8] and [2] to select "Motion Position"
and then press [SET].
4.
Press [RING].
• This will select one of the two icons on the
display. Pressing [RING] toggles the selection
between the start self-timer icon and the preview icon.
5.
Use [8], [2], [4], and [6] to reposition the currently selected icon.
6.
Press [RING] to select the other icon if you want, and reposition it
using the same operation as step 5.
7.
When the icons are located where you want, press [SET].
• You can also use the function ring to reposition an icon.
NOTE
• If you assign "Motion Position" to the "L/R Key" setting of the "r REC MENU"
(page 108), you will be able to reposition the selected icon with the [4] and [6]
keys while in the Handsfree Mode.
) hinders your view of the display
66
(Start self-timer
Start self-timer icon
Preview icon
Snapshot Tutorial