Casio Exilim EX-FC400S User Manual page 116

NOTE
• Only camera shake correction can be used during FHD and STD movie recording.
• Anti Shake correction is not supported during High Speed Movie, HDR Art Movie
recording or Time Lapse.
• When Anti Shake is enabled and "Auto" is selected for "ISO" (page 51), ISO
sensitivity, aperture, and shutter speed will not appear on the monitor screen when
you half-press the shutter button. These values will appear in the display of the
image immediately after it is shot.
• Shooting with Anti Shake enabled can cause an image to appear somewhat
coarser than normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• Anti Shake may not work properly when the camera is mounted on a tripod. Turn
off Anti Shake.
• Even if "Strong" is selected for the Anti Shake setting, some shooting conditions
may make it impossible to achieve the desired Anti Shake results.
116
Advanced Settings (REC MENU)