Casio Exilim EX-FC400S User Manual page 171

9.
Use [4] and [6] to display the sync point of
the second movie, and then press [2].
• If the message "Busy... Please wait..." appears
after you press [2], wait until the message
disappears. Playback of the second movie will
start after the message disappears.
• You can zoom the image during movie playback
by operating the zoom slider.
• Pressing [2] while movie playback is in progress
will perform either of the operations described
below, depending on when during the movie you
pressed it.
– Pressing [2] anywhere in the move prior to
the sync point will jump to the sync point.
– Pressing [2] at the sync point or anywhere
past it will jump to the start of the movie.
NOTE
• Certain types of memory cards can slow down processing speed. Whenever
possible use an Ultra High-Speed Type memory card. Note, however, that not all
operations can be guaranteed even if an Ultra High-Speed Type memory card is
used.
• The maximum Dual Screen Play duration at normal speed is five seconds.
• The following functions are not available during Dual Screen Play.
MOTION PRINT, Movie Editing
• Dual Screen Play data is stored in memory in a folder named EXILIM. Note that
deleting the EXILIM folder will cause Dual Screen Play List contents to be lost.
• Turning off the camera causes Dual Screen Play data to be stored in a folder
named EXILIM in camera memory. Note that removing the camera's battery or
memory card before turning off the camera will cause all current Dual Screen Play
data to be lost.
. To edit Dual Screen Play data (Dual Screen Play Edit)
1.
Start playback of the Dual Screen Play data you want to edit.
2.
Press [SET] to pause it.
• While Dual Screen Play is in progress or paused, you can select either movie
by pressing [RING]. Each press of [RING] cycles through the following
sequence: Left movie selected * Right movie selected * No movie
selected.
Using the Camera to Record and Analyze a Golf Swing
171