Table of Contents
Advertisement
2.
Get the ball aligned with the guide that appears
on the camera monitor screen.
3.
Press [0] (Movie).
This will cause the
to the
(start self-timer) icon, and put the camera
into movie standby.
4.
Move a golf club or something else near the start self-timer icon
When the camera detects subject movement near the icon, it will automatically
start a countdown from the Handsfree timer start time. The camera will start
shooting the movie when the countdown reaches zero. After five seconds,
recording will stop automatically and the
monitor screen.
• After shooting is complete, the message "Busy... Please wait..." will appear on
the monitor screen. Wait until this message disappears.
• Camera response to movement may become poor when the background is
close to the same color as the subject (your golf club), or when the subject is
too far away from the camera.
• The camera will focus the image automatically before shooting starts, but the
focus setting will remain fixed while recording is in progress.
• To stop movie recording part way through, press [0] (Movie) again.
5.
To view the movie you just shot, move your hand in the vicinity of the
(preview) icon.
• When the camera detects your movement, it will play back the movie. Use this
feature when you want to check your swing immediately after recording it.
. To shoot the moment of impact with the self-timer
1.
Press [SET].
2.
Use [8] and [2] to select the
then press [SET].
3.
Use [8] and [2] to select „ (10 seconds) or ‚ (2 seconds) and then
press [SET].
4.
Get the ball aligned with the guide that appears
on the camera monitor screen.
• You can tilt the monitor screen 180 degrees so it
faces in the same direction as the lens for easier
composition of self-portraits.
(REC standby) icon to change
(Self-timer) Control Panel option, and
159
(preview) icon will appear on the
Using the Camera to Record and Analyze a Golf Swing
.
Advertisement
Table of Contents
