Shooting With Prerecord Cs - Casio Exilim EX-FC400S User Manual

. Shooting with Prerecord CS

Half-pressing and holding the shutter button causes a pre-record buffer to be
continually updated with images. When the shutter button is fully pressed, buffer
contents are recorded along with a series of real-time images. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
Shutter button
half-press
Pre-recorded images
1.
In the BEST SHOT Mode, select "High Speed CS" (page 83).
2.
Press [SET].
3.
Use [8] and [2] to select the
option and then press [SET].
4.
Use [8] and [2] to select the continuous shutter (CS) speed you want
and then press [4].
• Use a higher "High Speed CS fps" setting when shooting a fast-moving subject.
5.
Use [8] and [2] to select the
option and then press [SET].
6.
Use [8] and [2] to select the maximum number of shots and then
press [4].
7.
Use [8] and [2] to select the
option and then press [SET].
8.
Use [8] and [2] to select the number of Prerecord (Still) images and
then press [SET].
• Settings: 0 shots, 3 shots, 5 shots, 10 shots, 15 shots, 20 shots, 25 shots
• If you select "0 shots", no pre-record images will be stored when you half-press
the shutter button.
Shutter button
full-press
Recorded images (up to 30 images)
Continuous recording of images until shutter
(High Speed CS fps) Control Panel
(Maximum CS Shots) Control Panel
(Pre-record CS Shots) Control Panel
94
button released
Shutter button
release
Using BEST SHOT