Table of Contents
Advertisement
Triggering a Self-timer Operation with Motion (Motion Shutter)
With this feature, the camera automatically triggers a self-
timer countdown whenever it detects movement in the
vicinity of an icon on the monitor screen. This means you
can control operation of the self-timer from a distance by
waving your hand, so you can include yourself in the
image being shot.
1.
Select one of the following as the recording mode: Program Auto or
Premium Auto Pro, or Make-up.
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select "r REC MENU" tab, and then
press [6].
4.
Use [8] and [2] to select "Motion Shutter", and then press [6].
5.
Use [8] and [2] to select "Motion Settings", and then press [6].
6.
Use [8] and [2] to select "Always" or "180°only", and then press
[SET].
• If you select "180°only", go to step 7. Selecting "Always" activates Motion
Shutter. Advance to step 8.
7.
If you selected "180°only" in step 6 above, tilt the camera's monitor
screen 180 degrees (page 19).
This activates Motion Shutter.
8.
Press the shutter button (if you want to shoot a snapshot) or
[0] (Movie) (if you want to shoot a movie).
• About three seconds after you press the shutter button or [0] (Movie) button,
the camera will go into standby. This will cause the self-timer icon "
change from flashing to blue.
9.
Facing the camera, move your hand or perform some other movement
in the vicinity of the
When the camera detects movement near the icon, it will automatically shoot an
image.
• To stop movie recording, press [0] (Movie) again.
(start self-timer) icon on the monitor screen.
64
" to
Snapshot Tutorial
Advertisement
Table of Contents
