System Information - Foxconn D42S User Manual

System Information

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
System Time
System Date
► SATA Channel 1
► SATA Channel 2
Halt On
Keyboard
Mouse
Model Name
BIOS Version
Memory
MAC Address
Genuine Intel(R) CPU
↑↓←→:Move Enter:Select
This submenu is used to set up the standard BIOS features, such as the date, time, IDE channel
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
► System Time
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► SATA Channel 1 /SATA Channel �
While entering setup, BIOS automatically detects the presence of SATA devices. This item
displays the drive information of SATA devices.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-
► Keyboard
System Information
[17 : 33 : 49]
17
[Tue 10/20/2009]
[Not Detected]
[Not Detected]
[All Errors, But ...]
[Disabled]
[Disabled]
:D52S/D42S
:P01
:1024MB
:00-00-00-00-00-30
@ 1.66GHz
+/-/:Value
F9:Optimized Defaults
SATA Channel 2
tion can be enabled/disabled in the next two settings.
Help Item
Use [Enter], [TAB]
or [SHIFT-TAB] to or [SHIFT-TAB] to
select a field.
Use [+] or [-] to Use [+] or [-] to
change system time.
F10:Save ESC:Exit
17
F1:General Help