Smart Bios - Foxconn D42S User Manual

Smart bIoS

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Smart Power LED
Smart Boot Menu
Current CPU Speed
Current FSB Speed
Current CPU Multiplier
Current DRAM Speed
↑↓←→:Move Enter:Select
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
System Status
Normal
No Memory
No Display
Post Error Message
► Smart Boot Menu
�hen PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also
prevents user without password trying to get into your computer through smart boot menu.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB Speed
This item displays the current Front Side Bus clock.
► Current CPU Multiplier
This item displays the current CPU Ratio.
► Current DRAM Speed
This item displays the current DRAM Speed.
Smart BIOS
[Enabled] [Enabled] [Enabled]
[Enabled] [Enabled]
: 1.66GHz 1.66GHz 1.66GHz
: 666MHz
: 10
: 800MHz
+/-/:Value F10:Save
F9:Optimized Defaults
Power LED Status
Always On
Continue blinking On (1sec.), Off (1sec.)
Continue blinking On (2sec.), Off (2sec.)
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
23
Help Item Help Item Help Item
Options
Disabled Disabled
Enabled
ESC:Exit F1:General Help
Stop Blinking Condition
Always On
Reboot .. Memory OK
Reboot .. Display OK
Enter Setup or Skip