Lexmark CX410e User Manual page 167

Understanding printer menus
Use
Sides (Duplex)
Off
On
Separator Sheets
Off
Before Job
After Job
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600
Fax Forwarding
Print
Print and Forward
Forward
Forward to
Fax
E‑mail
FTP
LDSS
eSF
Forward to Shortcut
Block No Name Fax
Off
On
Banned Fax List
Holding Faxes
Held Fax Mode
Off
Always On
Manual
Scheduled
Fax Holding Schedule
To
Enable two‑sided (duplex) printing for incoming fax jobs.
Note: Off is the factory default setting.
Enable the printer to include separator sheets for incoming fax jobs.
Note: Off is the factory default setting.
Specify the paper source for the separator sheet.
Note: Tray 1 is the factory default setting.
Print the transmission information at the bottom of each page from a received fax.
Note: Off is the factory default setting.
Specify the maximum speed in baud at which faxes are received.
Note: 33600 is the factory default setting.
Enable forwarding of received faxes to another recipient.
Note: Print is the factory default setting.
Specify the type of recipient to which faxes are forwarded.
Notes:
•
Fax is the factory default setting.
•
This menu item is available only from the printer Embedded Web Server.
Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS,
or eSF).
Enable blocking of incoming faxes sent from devices with no station ID or fax ID
specified.
Note: Off is the factory default setting.
Enable the list of blocked fax numbers stored in the printer.
Enable fax holding all of the time or according to set schedule.
Note: Off is the factory default setting.
167