Lexmark CX410e User Manual page 101

Faxing
•
Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug
an analog telephone into the splitter and then listen for a dial tone.
Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the facility
1
Connect one end of the telephone cable that came with your printer to the
2
Connect the other end of the telephone cable to an active analog telephone wall jack.
3
Connect your analog telephone to the
Scenario 5: Countries or regions with different telephone wall jacks and plugs
Some countries or regions may have different types of telephone wall jack connectors than those that came with the
printer. The standard wall jack adopted by most countries or regions is RJ-11. Your printer comes with the RJ-11 jack
and a telephone cable with the RJ-11 plug.
port of the printer.
port of the printer.
101