Bosch ICP-CC488 User Manual page 21

ICP-CC488 | User's Guide | 22.
Table 16: continued
Term
panic
sealed
sensor watch
silent alarm
STAY Mode 1
STAY Mode 2
telco arming
sequence
telco disarming
sequence
unsealed
user code
zone
Bosch Security Systems, Inc. | 12/08 | F01U089456-02
Glossary of Terms
Description
A condition or type of alarm in which the user requires either immediate police or
medical assistance.
Refers to a zone's status. If a zone is sealed, the detection devices are not violated
and the zone indicator is not lit (that is, a reed switch is closed or a detector is on
standby waiting for an intrusion).
A feature that allows the control panel to recognize when detection devices might
have stopped working. Sensor watch monitors the operation of a zone over a
programmed time period.
An alarm that sounds only at a remote location, and gives no obvious local
indication that an alarm was sent out.
A condition that automatically isolates certain zones when the security system is
armed in this mode. Only the installer can program these zones.
A condition that automatically isolates certain zones when the security system is
armed in this mode. The Master Code holder can program these zones.
A feature that automatically diverts a telephone number to another telephone when
a security system is armed in AWAY Mode, the same as using call forwarding.
An automatic suspension of diverting of the telephone when the system is disarmed.
Refers to a zone's status. If a zone is unsealed, the detection devices are violated
and the zone indicator is lit (that is, a reed switch is open or a detector noted an
intrusion).
A numeric code used to arm and disarm the system.
A monitored input used to activate an alarm. A zone might be set up to activate an
alarm only when the system is armed or to operate whether the system is armed or
disarmed.
EN | 21