Fujitsu PRIMERGY TX300 S7 Operating Manual page 73

LAN indicators
Figure 13: Indicators on the connection panel: LAN indicators
1 LAN
link/transfer
indicator
2 LAN speed
indicator
I
Depending on the settings in the BIOS, the standard LAN port 1 may also
be used as a management LAN port. You will find further information in
the "D2949 BIOS Setup Utility for PRIMERGY TX300 S7⁄ RX350 S7
Reference Manual".
TX300 S7 / RX350 S7
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Steady yellow signal in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Operating Manual
Starting up and operation
73