Installation Steps, Overview - Fujitsu PRIMERGY TX300 S7 Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps you need to carry out to install
your server. Links take you to sections where you can find more detailed
information about the respective steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that you have all necessary manuals (see
overview" on page
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê Set up the floorstand model (see section
on page 51) or install the rack model in the rack (see section
"Installing/removing the rack model" on page
Ê Wire the server. Follow the instructions in sections
the server" on page 54
page 58.
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
TX300 S7 / RX350 S7
"Important information" on page
"Unpacking the server" on page
12); print out the PDF files if required.
and "Notes on connecting/disconnecting cables" on
56).
"Controls and indicators" on page
Operating Manual
35.
"Documentation
"Setting up the floorstand model"
52).
"Connecting devices to
"Connecting the server to the
64).
50).
33