Fujitsu PRIMERGY TX300 S7 Operating Manual page 38

Important information
V
CAUTION!
Proper operation of the system (in accordance with IEC 60950-1/2
●
resp. EN 60950-1/2) is only ensured if the casing is completely
assembled and the rear covers for the installation slots have been
fitted (electric shock, cooling, fire protection, interference
suppression).
Only install system expansions that satisfy the requirements and
●
rules governing safety and electromagnetic compatibility and those
relating to telecommunication terminals. If you install other
expansions, they may damage the system or violate the safety
regulations. Information on which system expansions are approved
for installation can be obtained from our customer service center or
your sales outlet.
The components marked with a warning notice (e.g. lightning symbol)
●
may only be opened, removed or exchanged by authorized, qualified
personnel. Exception: CSS components can be replaced.
The warranty is void if the server is damaged during installation or
●
replacement of system expansions.
Only set screen resolutions and refresh rates that are specified in the
●
operating manual for the monitor. Otherwise, you may damage your
monitor. If you are in any doubt, contact your sales outlet or customer
service center.
Before installing/removing internal options to/from the server, turn off
●
the server, all peripheral devices, and any other connected devices.
Also unplug all power cords from the outlet. Failure to do so can
cause electric shock.
Do not damage or modify internal cables or devices. Doing so may
●
cause a device failure, fire, or electric shock.
Devices inside the server remain hot after shutdown. Wait for a while
●
after shutdown before installing or removing internal options.
The circuit boards and soldered parts of internal options are exposed
●
and can be damaged by static electricity. Before handling them, first
touch a metal part of the server to discharge static electricity from
your body.
Do not touch the circuitry on boards or soldered parts. Hold the
●
metallic areas or the edges of the circuit boards.
38 Operating Manual
TX300 S7 / RX350 S7