Fujitsu PRIMERGY TX300 S7 Operating Manual page 23

Functional overview
Service and support
PRIMERGY servers are easy to maintain and modular, thus enabling quick and
simple maintenance.
The handles and locks (touch points) used to exchange components are
colored green to ensure simple and immediate recognition.
In order to prevent the components from being damaged by incorrect handling
when they are being installed and removed, the areas of all components that
can be touched without damaging them are also marked green.
PRIMERGY diagnostic LEDs fitted on the system board indicate which
component (memory module, processor, fan or expansion card) is not
functioning properly.
The Flash EPROM program supplied with the Fujitsu utilities supports a fast
BIOS update.
With the iRMC S3 (integrated Remote Management Controller) on the system
board, the PRIMERGY TX300 S7⁄ RX350 S7 server can also be maintained
and serviced remotely. This enables remote diagnosis for system analysis,
remote configuration and remote restart should the operating system or
hardware fail.
Operating Manual 23
TX300 S7 / RX350 S7