Set Up A Repeater Unit - NETGEAR DGND4000 User Manual

N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
2. Select ADVANCED > Advanced Setup > Wireless Repeating Function to display the
Wireless Repeating Function screen.
3. Depending on the frequency you want to use, select the Enable Wireless Repeating
Function check box and select the Wireless Base Station radio button.
4. Enter the MAC address for one or more repeater units.
5. Click Apply to save your changes.

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
Note: If you are using the DGND4000 base station with a non-NETGEAR
wireless modem router as the repeater, you might need to change
additional configuration settings. In particular, you should disable the
DHCP server function on the wireless repeater AP.

To configure the wireless modem router as a repeater unit:
1. Log in to the wireless modem router that is the repeater. Select BASIC > Wireless
Settings and verify that the wireless settings match the base unit exactly. The wireless
security option has to be set to WEP or None.
2. Select ADVANCED > Advanced Setup > Wireless Repeating Function, and select the
Enable Wireless Repeating Function check box and the Wireless Repeater radio button.
3. Fill in the Repeater IP Address field. This IP address has to be in the same subnet as the
base station, but different from the LAN IP of the base station.
Advanced Settings
110