Verify The Cabling - NETGEAR DGND4000 User Manual

N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
The installation guide that came in the box has a cabling diagram on the second page.
Connect to ADSL
if connecting directly
to a DSL line.
Internet
Note:
Add an ADSL filter for every
telephone on the same phone line
as your wireless modem router.
Step 1:
Connect to Internet with ADSL or Ethernet WAN.
Internet
Connect to Ethernet WAN
if connecting to a
fiber/cable modem.
Figure 7. Cabling diagram
CAUTION:
Incorrectly connecting a filter to your wireless modem router blocks your
ADSL connection.

Verify the Cabling

Verify that your router is cabled correctly by checking the wireless modem router LEDs. Turn
on the wireless router by pressing the Power On/Off button on the back.
• The Power LED is green when the modem router is turned on.
• The LAN port LED is green when a computer is cabled to the router by an Ethernet
cable.
• The Wireless LEDs are lit when the modem router is turned on.
• The DSL LED is green when you have an ADSL connection.
• The Internet LED is green when there is an Internet connection.
Turn on your computer. If software usually logs you in to your Internet connection, do not run
that software. Cancel it if it starts automatically.
Phone cable
Line
Ethernet cable
Power On/Off
Fiber/Cable modem
Hardware Setup
20
Step 2:
Cable your computer.
Ethernet cable
(not included)
Power adapter
N600 Wireless Modem Router
Note:
Keep the DGND3700v2
N600 Wireless Modem Router
in a vertical position.
Step 3:
Power on your router.
Wait until the 2.4 GHz
Wireless LED turns solid
green.
Laptop or desktop
computer
2.4 GHz
Wireless LED
N600 Wireless Modem Router