Menu Dial; Power Switch (On/Off); Menu Display; How To Use The Control Panel - Worcester GREENSOURCE User Manual

Control panel

Menu dial

The menu dial is used to navigate between the menus and to confi rm your
selection. You are also able to determine the values of different settings by
using the dial. If, for example, you turn the menu dial clockwise the value
will increase. Always press the menu dial to confi rm your selection.

Power switch (ON/OFF)

You start and stop the heating installation using the power switch button.

Menu display

The menu display gives you information and several settings options.
You are able to:
Select different temperatures for heating and hot water.
Select time control settings (different heat at different times).
See alarm causes and receive corrective instructions.

How to use the control panel

Navigate the menus using the menu dial. Turn the menu dial clockwise to
move down through the menus. Turn the menu dial anti-clockwise to move
up through the menus. When the desired menu is highlighted, press the
menu dial to confi rm your selection.
Certain functions have longer names than available space in the menu
window. In such cases, the row switches to show the different parts of
the text. Example: Room temperature setting: First, Room temperature... is
displayed, this then goes out and ...setting is displayed for a few seconds,
whereupon Room temperature... is displayed again. At the top and bottom
of each sub menu there are back arrows that take you back to the previous
menu. Press the menu dial when these are marked.

Symbol overview

Symbols for different functions and components that are
in operation are displayed in the lower part of the menu
window.
Timer Control
Compressor
Hot water mode
Holiday operation Additional heat
12
Back arrows
Heating mode
Hot water peak
Power guard
Fan
Extra hot water
Alarm