Control Panel; Status Led - Worcester GREENSOURCE User Manual

Control panel

All settings are made in the control panel and any alarms can be
viewed in the panel. The control unit is controlled via the panel in
accordance with your requirements.
When the heat pump is combined with the hot water distribution
unit, the control panel and control unit are in the hot water distribu-
tion unit.
Greensource hot water distribution unit
Menu
window

Status LED

The control cabinet's status LED is on the outside of the unit.
Switch ON/OFF in ON position.
LED lights green:
LED fl ashes green: Switch ON/OFF in OFF position.
No voltage to control unit.
LED not lit:
An alarm has been triggered and the alarm has not
LED fl ashes red:
been acknowledged.
(See section What to do if a fault occurs.)
A fault has occurred. Contact the installer.
LED lights red:
(See section What to do if a fault occurs.)
Status LED
Menu dial
Switch
(ON/OFF)
11
Control panel