Paper Problems - Olivetti PG L8en Operator's Manual

Paper Problems

Problem
Paper sticks
together/multiple sheets of
paper feed
Paper fails to feed
Paper skews or buckles
Envelopes skew
Envelopes fail to feed
correctly
• Remove paper from the paper feeder and flex or fan the
paper.
• Make sure there is not too much paper in the paper
tray. Depending on the thickness of your paper, the
automatic feeder holds up to 150 sheets.
• Make sure you are using the correct type of paper. See
"Selecting Paper Types and Feed Source" on page 18.
• Different types of paper may be stacked in the
automatic feeder. Load just one type of paper.
• Remove paper from the paper feeder and flex or fan the
paper.
• Make sure the paper source you selected in your
application is correct.
• Remove any obstructions inside the printer.
• Make sure there is not too much paper in the automatic
feeder. Depending on paper thickness, the automatic
feeder can hold up to 150 sheets of paper.
• Make sure the paper guides do not cause the paper to
bow in the paper feeder.
• Make sure you are using the correct type of paper. See
"Selecting Paper Types and Feed Source" on page 18.
• Make sure the paper guides do not cause envelopes to
bow in the paper feeder.
• Make sure the envelopes are loaded properly, and that
there are no more than 10 envelopes in the automatic
feeder.
• Try a different kind. Envelopes designed for laser
printers will produce the best results.
• Envelopes may not match specification for this
machine.
Action
Troubleshooting and Maintenance
41