Table of Contents
Advertisement
34
Operating Your Printer
The Remote Control Panel dialog box includes six tabs.
PRINTER
Power Save
Determines the length of time the printer waits after a job is printed
before it goes to a reduced power state. If the printer is used
constantly, select OFF which keeps the printer ready to print with
the minimum warm-up time. This uses more energy to keep the
printer warm and ready to print.
Timeout
Determines the amount of time in seconds the printer waits before
printing the last page of a print job that does not end with a
command to print the page.
Auto Continue
It determines the printer action when the user prints a page without
paper in the manual feed slot but the paper source is set to manual
feed. If Auto Continue is ON the printer picks up the paper from
tray after 10 seconds. If Auto Continue is OFF the printer waits
forever until the user inserts paper into the manual feed slot.
Emulation
You can select the emulation for printing a document.
Econo Mode
To get the most from your toner supply, set Econo Mode to ON. If
you set Econo Mode to ON, print quality may be reduced.
Jam Recovery
If paper jams as it exits to the output bin, the data on the jammed
page will be lost. If you set Jam Recovery feature to ON, the printer
keeps the image for a printed page until the printer signals that the
page has successfully exited the printer. The printer reprints all
jammed pages.
With the feature set to OFF, the printer does not reprint a page that
has jammed.
Advertisement
Table of Contents
