Olivetti PG L8en Operator's Manual page 40

EPSON
Font
Autowrap
Character Set
Character Table
LPI(Lines Per Inch)
Pitch
Font List
QUALITY
Density
SMET
SRT
ABOUT
36
Operating Your Printer
Allows you to select the desired font of EPSON.
It determines the printer performs line feed automatically when
the data to print are over the right margin.
It selects the set of characters printed for specific character codes.
It selects the character sets.
It sets the line spaceing.
It sets the number of characters per inch.
Prints the font list showing all the fonts available for EPSON
emulation.
Determines the overall density of the printed image.
SMET(Olivetti Memory Enhancemant Technology) mode makes
the printer process more data by optimizing the memory. With this
mode set to ON,the complex data can be processed.
Use the printer's RET to produce print with smooth angles, curves
and edges.
This tab shows the software version and copyright information.