Printing A Document; Print Settings - Olivetti PG L8en Operator's Manual

Printing a Document

This procedure describes the general steps required for printing from
various Windows applications. The exact steps for printing a
document may vary depending on the application you are using.
Refer to your application's documentation for the exact printing
procedure.
1. Start the program you are using to create the document, and/or
open the document you want to print.
2. Choose Print or Print Setup from the File menu. The Print or
Print Setup dialog appears to make changes to the printer setting.
3. If you click on Properties, Setup, or Options in the dialog box,
you'll access the printer driver and you can make any additional
setting as appropriate for printing your document. See 'Print
Settings' on page 31. The settings you can change depend on the
printer you selected.
4. Select OK to close the dialog box.
5. After making any necessary changes to the print parameters,
select OK to start the print job.
Note: The way you access the printer driver varies depending on the
programs you use.

Print Settings

Most Windows applications allow you to make changes to the printer
settings. This changes the number of copies, sequence of the pages,
paper orientation, and margins.
If you click Properties, Setup, or Options in the Print dialog box,
you'll access the printer driver's dialog box. It allows you to change
additional printer settings.
Note: Most Windows applications will override settings you specify in the
printer driver. Change all printer settings available in the software
application first, and any remaining settings with the printer driver.
Operating Your Printer
31