Windows 95/98 Plug And Play; If Windows Does Not Run The Cd-Rom - Olivetti PG L8en Operator's Manual

4. Click the Item you want to install.
5. Follow the instructions on the screen.

Windows 95/98 Plug and Play

1. At the 'New Hardware Found' dialog box, click on the OK button.
2. Insert the setup CD-ROM into your CD-ROM drive.
3. Follow the instructions on the screen.

If Windows Does Not Run the CD-ROM

1. Select Run from the Start menu.
2. Type d:\setup.exe on the command line (where "d" is your
CD-ROM drive letter), then click OK.
3. Follow the instructions on the screen.
13
Setting Up Your Printer