Scanner Configuration - Visioneer Strobe 500 User Manual

S C
CANNER ONFIGURATION
The scanner configuration tab shows the hardware information for your scanner.
• Enable the detection of excessive document skew—when selected, scanning will stop if the scanner
detects that an item is being fed through at too great of an angle.
• Exit front-fed paper through the back—when selected, front-fed pages will exit from the back of the
scanner. When this option is not selected, front-fed paper will exit from the front of the scanner.
• Calibrate—click the Calibrate button to start the scanner calibration wizard. The scanner self-calibrates
when you click the Calibrate button. The calibration window on-screen will close automatically when
calibration is finished. If it doesn't close automatically, click the Finish button.
S M
CANNER AINTENANCE
• Counters—click the reset button next to the counter you want to set back to 0.
You can use this option to monitor the number of scans completed since the last time a part has been
replaced.
S TWAIN
CANNING FROM AND
WIA 173