Table of Contents
Advertisement
PROGRAMMING
PROGRAM MODE - TACH SETTINGS
See page 6 for Auto Tach Learning
Setting 1- Method 2- Low Idle Learn
Button for (5sec).
Setting 2- Adjust For Over-Crank
Setting 3- Adjust For Under-Crank
PROGRAM MODE - USER SETTINGS
Enter USER SETTINGS - Program Mode - See Page 7 for details on entering program mode
Setting 1- Ignition Auto Lock
1 Ignition Lock & Unlock Enabled
2 Ignition Lock Only
*3 Ignition Auto Lock Disabled
Press the Program Switch 1 time to select setting 1 (This will be confirmed by 1 LED flash)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or horn honks.
Release the Program Switch. Press the Program momentarily to move to next program step or repeat to change selection.
Setting 2- Horn Honk Settings
1 Lock & Unlock chirps Disabled
2 Lock & Unlock chirps Enabled
*3 All chirps enabled
Press the Program Switch 2 times to select setting 2 (This will be confirmed by 2 LED flashes)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or horn honks
Release the Program Switch. Press the Program momentarily to move to next program step or repeat to change selection.
Setting 3- Door Lock Options
1 Double Pulse Unlock
2 3 Second Lock & Unlock
*3 0.75 Second Pulses
Press the Program Switch 3 times to select setting 3 (This will be confirmed by 3 LED flashes)
Press and hold the Program Switch until you receive the appropriate # of park light flashes and/or horn honks.
Release the Program Switch. Press the Program momentarily to move to next program step or repeat to change selection.
8
(Ignition ON-OFF-ON-OFF-ON) then press the Program button on the antenna 1 time.
Press the # button on the remote.(Button #4).
Using the ignition key, make sure not to turn the key off at any time or your will exit programming.
One time (Led will start flashing in single cycles) then press and hold Program
(Ignition ON-OFF-ON-OFF-ON) then press the Program button on the antenna 1 time.
Press the # button on the remote.
2 times (Led will start flashing 2 times).
For 5 seconds until parking lights flash (each time lights flash tach is reduced 5%).
(Ignition ON-OFF-ON-OFF-ON) then press the Program button on the antenna 1 time.
Press the # on the remote.(Button #4).
3 times (Led will start flashing 3 times).
For 5 seconds until parking lights flash (each time lights flash tach is increased 5%).
1 Light Flash
2 Light Flashes
3 Light Flashes
1 Flash
2 Flashes
3 Flashes
1 Flash
2 Flashes
3 Flashes
Doors Lock / Unlock when the key is turned On/ Off
Doors Lock when ignition key is turned ON only
Doors do not Lock or Unlock with Ignition key
Honks for Panic and Car Finder Mode only.
Honks for Lock, Unlock, Panic and Car Finder Mode Only.
Honks for Lock, Unlock, Start, Panic and Car Finder Mode.
Single .75sec.Lock pulse and double Unlock Pulse
3 second pulses for Lock & Unlock
0.75 second pulses for Lock and Unlock
Hide quick links:
Advertisement
Table of Contents
