Ultra Start 1172 Series Installation Manual page 16

Advanced remote starters & vehicle security systems
Hide thumbs Also See for 1172 Series:
Table of Contents

Advertisement

1172 SERIES
INSTALL MANUAL
ENTERING PROGRAM MODE 1
IGNITION KEY
ON/OFF - ON/OFF - ON
(Leaving the key ON)
SETTING 1- IGNITION AUTO-LOCKS
THE HORN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
CHANGE SETTING 1 -
GOTO SETTING 2 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
SETTING 2-HORN OUTPUT
THE HORN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED
CHANGE SETTING 2 -
GOTO SETTING 3 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRPS
SETTING 3-DOOR LOCK PULSES
THE HORN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
CHANGE SETTING 3 -
GOTO SETTING 4 - PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRPS
3 CHIRPS
CON'T ON NEXT PAGE
SYSTEM PROGRAMMING - Menu 1
PROGRAM SWITCH
Press and release 1 time
PRESS & HOLD THE VALET SWITCH UNTIL THE HORN CHIRP(S)
SETS OPTION 1 – AUTO-LOCK & UNLOCK ENABLED- The doors will lock when
the key is turned on and unlock the when the key is turned off.
SETS OPTION 2 – AUTO LOCK ONLY ENABLED- The doors will lock when the key
is turned on but will not unlock when te key is turned off.
SETS OPTION 3 – AUTO LOCK DISABLED- The doors will not lock or unlock
when the key is turned on or off. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE HORN CHIRP(S)
SETS OPTION 1 – HORN DISABLED- The HORN and HORN and will activate with
Panic and Car Finder Mode only.
SETS OPTION 2 – HORN OUTPUT- The HORN and the HORN* (alarm models)
output will activate for all functions. (DEFAULT)
PRESS & HOLD THE VALET SWITCH UNTIL THE HORN CHIRP(S)
SETS OPTION 1 – DOUBLE UNLOCK & SINGLE LOCK PULSE- The system will
provide 2 unlock pulses w/unlock and 1 lock pulse w/lock.
SETS OPTION 2 - DOUBLE LOCK & SINGLE UNLOCK PULSE- The system will
provide 2 lock pulses and 2 unlock pulses.
SETS OPTION 3 – NORMAL OPERATION- The system will pulse once for lock
and once for unlock. (DEFAULT)
SYSTEM PROGRAMMING - Menu 1
PROGRAMMING
HORN CHIRP
1 CHIRP
Confirming
Program Mode
PRESS
1 CHIRP
1 TIME
PRESS
2 CHIRPS
1 TIME
PRESS
3 CHIRPS
1 TIME
PAGE 16
PROGRAM SWITCH
Press and release the
antenna 1 time or press
LOCK on4 button remot
1X
2X
3X
e

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1272 series

Table of Contents