Real Time Transmission - Brother FAX-2840 Advanced User's Manual

Chapter 3
e
Press Start.
After the broadcast is finished the machine
will print a broadcast report to let you know
the results.
Cancelling a Broadcast in progress
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
Press Menu, 2, 7.
The LCD will display the Broadcast job
number followed by the fax number
being dialled (for example, #001
123456789) and the broadcast job
number (for example,
Broadcast#001).
b
Press a or b to choose one of the
following:
Choose the fax number being

dialled, and press OK.
 Choose the broadcast job number,
and press OK.
c
Press 1 to cancel the fax number or
Broadcast job number you chose in step
b, or press 2 to exit without cancelling.
 If you chose to only cancel the fax
currently being sent in step b, the
LCD will ask you if you want to
cancel the broadcast job. Press 1 to
clear the whole broadcast job or 2 to
exit.
d
Press Stop/Exit.
14

Real Time Transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialling and
sending.
3
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Note
• If the memory is full, the machine will send
the document in real time (even if
Real Time TX is set to Off).
• Next Fax:On or Next Fax:Off can be
selected only if a document is loaded.
Sending in real time for all faxes
a
Make sure you are in FAX mode
b
Press Menu, 2, 2, 5.
c
Press a or b to choose On.
Press OK.
Sending in real time for the next fax
only
a
Make sure you are in FAX mode
b
Press Menu, 2, 2, 5.
c
Press a or b to choose Next Fax:On.
Press OK.
Not sending in real time for the next
fax only
a
Make sure you are in FAX mode
b
Press Menu, 2, 2, 5.
3
3
.
3
.
3
.