Setting The Print Density; Printing A Fax From The Memory; Out Of Paper Reception - Brother FAX-2840 Advanced User's Manual

d
Press Stop/Exit.

Setting the Print Density

You can adjust the Print Density setting to
make your printed pages darker or lighter.
a
Make sure you are in FAX mode
b
For FAX-2840 and MFC-7240, press
Menu, 2, 1, 7.
For FAX-2950 and MFC-7290, press
Menu, 2, 1, 6.
c
Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
d
Press Stop/Exit.
Printing a fax from the
memory
If you are using the Fax Storage feature
(Menu, 2, 5, 1), you can still print a fax from
the memory when you are at your machine.
(See Fax Storage uu page 19.)
a
Press Menu, 2, 5, 3.
b
Press Start.
c
Press Stop/Exit.

Out of Paper Reception

As soon as the paper tray becomes empty
during fax reception, the LCD shows No
Paper. Put some paper in the paper tray.
(See Basic User's Guide: Loading paper and
print media.)
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Incoming faxes will continue to be stored in
the memory until the memory becomes full or
paper is loaded in the paper tray. When the
memory is full the machine will stop
4
automatically answering calls. To print the
faxes, put fresh paper in the tray and press
Start.
(For FAX-2840 and MFC-7240)
.
For details on how to set the Memory Receive
manually, see Receiving faxes into memory
(FAX-2840 and MFC-7240) uu page 24.
4
4
Receiving a fax
4
25