GE JGBP26GEN Use And Care & Installation Manual page 48

HOW TO CONVERT THE RANGE FOR
WITH 1P GAS OR HATURAL GAS
TOP
BURNER VALVES
Turn all top
1.
burners to LOW.
2. Remove all
four knobs.
3. With a small flat
blade screwdriver, turn
the valve set screws
clockwise to decrease
flame size, counterclockwise
to increase flame size. Adjust
until the flame is about the same
height as the top of the burner.
4. Replace knobs.
5. Check for flame outage by opening and
closing the oven door several times. If the flame
goes out, increase the flame size.
48
USE
(continued)
\
'
CHECK QUALITY OF FL~ES
The combustion quality of burner flames needs
to be determined visually.
If burner flames look like (A), call for service.
Normal burner flames should look like (B) or
(C), depending on the type of gas you use.
With LP gas, some yellow tipping on outer cones
is normal.
(B) YeMow tips on
outer cones—
Normal for LP gas
(C) %fi blue fl=eb
Normal for natural gas