To Take An Hourly Report - Royal Alpha 9180sc Instruction Manual

X/Z MANAGEMENT REPORTS
The following lists the different Management Reports that are offered in the "X" and "Z" positions:
Key Positions Report Symbols
X
X
Z
Z
TO TAKE A CASH-IN-DRAWER REPORT
1. Turn the key to the "X" position.
2. If an "X" Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the
[CHECK] key now, or if you did NOT program an "X" Manager Password, go to Step 3.
3. PRESS the [QTY/DATE] key.

TO TAKE AN HOURLY REPORT

1. Turn the key to the "X" or "Z" positions as desired.
2. If an "X" or a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then
PRESS the [CHECK] key, or if you did NOT program an "X" or a PRG/Z Manager Password, go to Step 3.
3. PRESS (11), then PRESS the [AMT TEND/TOTAL] key.
Important: An hourly reading must be closed out in the "Z" position.
(The next page shows an example of an Hourly Report)
Reports Known As
X1 Mid-Day
X2 Mid-Week or Mid-Month
Z1 End-Of-Day or Daily-Close-out
Z2 Weekly or Monthly
"X" + [QTY/DATE]
┌──────────────────────────┐
│
│ 01-24-99
│
│ C-I-D
│
│
│
└──────────────────────────┘
"X" or "Z" + (11) + [AMT TEND/TOTAL]
(Continued)
Full, PLU, Selective PLU, Selective Department,
Clerk, Hourly, Cash-In-Drawer
Full
Full, PLU, Clerk, Hourly
Full
│
MC #:5555 │
│
*44.16 ─┼── SHOWS $44.16 CASH-IN-DRAWER TOTAL
│
AM 7-51 0010 │
│
69
Management Reports Available