Wide Characters - Royal Alpha 9180sc Instruction Manual

(Continued)
The following outlines the maximum number of characters that can be programmed for each item description.
* Standard size characters. For Double Width, see below.
Please Note: The instructions for programming Department Descriptions is on Pages 26.
The instructions for programming PLU Descriptions is on Page 33.
The instructions for programming Clerk Descriptions is on Page 17.
The instructions for programming the Store Logo is on Page 43
The instructions for programming the Commercial Message is on Page 43.

WIDE CHARACTERS

For extra emphasis, you can program extra wide (double width) for each character.
If using double width characters, the maximum number of characters is reduced by half. For example, Departments
would normally use 12 characters, for double width, the maximum is 6 characters; PLUs would normally use 12
characters, for double width, the maximum is 6 characters.
To make a character print extra wide, the double width code of "01" must be used before each character.
Normal Size
PROGRAM STORE LOGO/COMMERICAL MESSAGE
A 5 line store header can be programmed to print on customer receipts. The header can be a maximum of 5 lines, each
line 20 characters (normal size) or 9 characters (double width).
"Your Receipt Thank You" ───────┤
is the default printout
for the header
Make a copy of the attached blank Store Logo Worksheet for future changes or revisions to your logo.
PROGRAMMING ALPHANUMERIC DESCRIPTIONS
DEPARTMENT
PLU
CLERK NAME
STORE LOGO/HEADER
COMMERCIAL MESSAGE
- 12 Characters *
- 12 Characters *
- 20 Characters *
- 5 Lines (20 Characters* each)
5 Lines (20 Characters* each)
Double Width
┌────────────────────────┐
│
│ ******************** ─┼────────── 1st line
│ * YOUR RECEIPT
* THANK YOU
│ *
│ ******************** ─┼────────── 5th line
│
│
│
└────────────────────────┘
45
│
* ─┼────────── 2nd line
* ─┼────────── 3rd line
* ─┼────────── 4th line
│
│
│