To Program The Coupon [Cpn] Key - Royal Alpha 9180sc Instruction Manual

COUPON DISCOUNT (CPN)

TO PROGRAM THE COUPON [CPN] KEY

The following two examples list the most commonly used options in programming the Coupon Discount [CPN] key.
VERSION 1: Select if no tax is programmed in the cash register or if you want to charge the tax rate on the
original amount of an item (the amount before the coupon is deducted).
Example: If HDLO is selected for "0", and the Tax Status Number is selected for "0" (non-taxable):
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS
the [CHECK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. ENTER (0)(00), then PRESS the [CPN] key.
Note: See Transaction Example 19 on Page 53 to ring up a coupon sale programmed with Version 1.
VERSION 2: Select if you want the tax rate to be charged on the discounted amount of an item (the amount after
the coupon is deducted).
Example: If HDLO is selected for "0", and the Tax Status is selected for "1" (taxable by TAX 1):
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS
the [CHECK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. ENTER (0)(01), then PRESS the [CPN] key.
Note: See Transaction Example 19 on Page 53 to ring up a coupon sale programmed with Version 2.
Confirmation Report: To check your results, a Program Confirmation Report is available. For details see Page 44.
(Continued)
"PRG" + (HDLO #) + [TAX STATUS #] + [CPN]
1 digit # 2 digit #
33