Weider 8530 User Manual page 25

REMOVE THIS PART IDENTIFICATION CHART
This chart is provided to help you identify the small parts used in assembly. Important: Some parts may
have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to
see if it has been pre-assembled. The number in parenthesis below each part refers to the key number of
the part. The second number refers to the quantity needed for assembly.
Note: Assembly is divided into five stages: 1) frame assem-
bly, 2) press and butterfly arm assembly, 3) cable and pulley
assembly, 4) seat and backrest assembly, and 5) VKR
assembly. The hardware for each stage is packaged sepa-
rately. WAIT UNTIL YOU BEGIN EACH ASSEMBLY STAGE
TO OPEN THE PARTS BAG LABELED FOR THAT ASSEM-
BLY STAGE.
FROM THE MANUAL