Arm Assembly - Weider 8530 User Manual

User manual
Hide thumbs Also See for 8530:
Table of Contents

Advertisement

7. Attach the upper ends of the Long Weight
Guides (62) to the Top Frame (55) with a
5/16” x 6” Bolt (60), two 1/2” x 3/4” Spacers
(61), and a 5/16” Nylon Locknut (3).
Be sure that the Pulley Bracket (20) is in
front of the right Long Weight Guide (62)
as shown.
Attach the upper ends of the Short Weight
Guides (73) to the Top Frame (55) with a
5/16” x 6” Bolt (60), two 1/2” x 3/4” Spacers
(61), and a 5/16” Nylon Locknut (3).
8. Press a 1” x 7/8” Plastic Bushing (90) onto
each welded spacer on the Press Frame (17).
Slide the Press Frame into place onto the
Base (4). Note: This will be a tight fit. The
Plastic Bushings should fit on each end of
the indicated tube in the Base. Make sure
that the pulleys are on the side shown.
Lubricate the 3/8” x 8” Bolt (59). Attach the
Press Frame (17) to the Base (4) with the
3/8” x 8” Bolt and a 3/8” Nylon Locknut (21).
9. Wet the handle of one Press Arm (46) with
soapy water. Slide a 5” Plastic Grip (83) onto
the handle. Press a 1” Round Inner Cap (49)
into the other end of the handle. Press a
1 3/4” Inner Cap (44) into the Press Arm.
Attach the Press Arm (46) to one side of the
Press Frame (17) with two 5/16” x 2 1/2”
Bolts (22) and two 5/16” Nylon Locknuts (3).
Assemble the other Press Arm (46) in the
same manner.
10. Identify the Right Arm (48) and the Left Arm
(47). Note the position of the welded bracket
on each Arm. Arm identification is very
important for step 11.
Attach a “V”-Pulley (50) and a Long Cable
Trap (31) to the Right Arm (48) with a 3/8” x
2 1/2” Bolt (86) and a 3/8” Nylon Locknut
(21).
Attach a “V”-Pulley (50) and a Long Cable
Trap (31) to the Left Arm (47) in the same
manner.
7
3
61
61
3
55
60
60
20
73
62
8
59
17
Lubricate
Welded
4—Tube
Spacers
21
90
9
44
49
83
Handle
46
22
46
3
17
10
86
31
50
31
50
47
Welded
Bracket
21
48
Page 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wesy8530c2

Table of Contents