Weider 350 Bench User Manual page 13

22. Slide an Olympic Adapter (22) onto the Barbell
(42) and secure it with an M8 x 10mm Set
Screw (99).
Repeat this step for the other end of the
Barbell (42).
23. See the CABLE DIAGRAM on page 20 to
identify the cables as you assemble them.
Identify the Lat Cable (74). Route the Cable
up through the Top Frame (31) and over a
90mm Pulley (55). Attach the Pulley inside the
Top Frame with an M10 x 68mm Bolt (85), two
M10 Washers (83), two 16mm x 13mm Spacers
(77), and an M10 Nylon Locknut (80).
24. Route the Lat Cable (74) over a 90mm Pulley
(55) and down through the Top Frame (31).
Attach the Pulley inside the Top Frame with an
M10 x 68mm Bolt (85), two M10 Washers (83),
two 16mm x 13mm Spacers (77), and an M10
Nylon Locknut (80).
22
42
23
55
83
80
77
77
74
24
13
22
99
31
83
85
55
80
31
83
77
74
77
83
85